Commands

This section describes the commands available from injectived, the command line interface that connects a running injectived process (node).

Several injectived commands require subcommands, arguments, or flags to operate. To view this information, run the injectived command with the --help or -h flag. See query or tx for usage examples of the help flag.

For the chain-id argument, injective-1 should be used for mainnet, and injective-888 should be used for testnet.

`add-genesis-account`

Adds a genesis account to genesis.json. For more information on genesis.json, see the Join Testnet or Join Mainnet guide.

Syntax

injectived add-genesis-account <address-or-key-name> <amount><coin-denominator>

Example

injectived add-genesis-account acc1 100000000000inj

`collect-gentxs`

Collects genesis transactions and outputs them to genesis.json. For more information on genesis.json, see the Join Testnet or Join Mainnet guide here.

Syntax

injectived collect-gentxs

`debug`

Helps debug the application. For a list of syntax and subcommands, run the debug command with the --help or -h flag:

injectived debug -h

Subcommands:

injectived debug [subcommand]

addr: Convert an address between hex and bech32
pubkey: Decode a pubkey from proto JSON
raw-bytes: Convert raw bytes output (e.g., [72 101 108 108 111 44 32 112 108 97 121 103 114 111 117 110 100]) to hex

`export`

Exports the state to JSON.

Syntax

injectived export

`gentx`

Adds a genesis transaction to genesis.json. For more information on genesis.json, see the Join Testnet or Join Mainnet guide.

Note: The gentx command has many flags available. Run the gentx command with --help or -h to view all flags.

Syntax

injectived gentx <key-name> <amount><coin-denominator>

Example

injectived gentx myKey 100000000000inj --home=/path/to/home/dir --keyring-backend=os --chain-id=injective-1 \
    --moniker="myValidator" \
    --commission-max-change-rate=0.01 \
    --commission-max-rate=1.0 \
    --commission-rate=0.07 \
    --details="..." \
    --security-contact="..." \
    --website="..."

`help`

Shows an overview of available commands.

Syntax

injectived help

`init`

Initializes the configuration files for a node.

Syntax

injectived init <moniker>

Example

injectived init myNode

`keys`

Manages Keyring commands. These keys may be in any format supported by the Tendermint crypto library and can be used by light-clients, full nodes, or any other application that needs to sign with a private key.

For a list of syntax and subcommands, run the keys command with the --help or -h flag:

injectived keys -h

Subcommands:

injectived keys [subcommand]

add: Add an encrypted private key (either newly generated or recovered), encrypt it, and save to the provided file name
delete: Delete the given keys
export: Export private keys
import: Import private keys into the local keybase
list: List all keys
migrate: Migrate keys from the legacy (db-based) Keybase
mnemonic: Compute the bip39 mnemonic for some input entropy
parse: Parse address from hex to bech32 and vice versa
show: Retrieve key information by name or address
unsafe-export-eth-key: Export an Ethereum private key in plain text
unsafe-import-eth-key: Import Ethereum private keys into the local keybase

migrate

Migrates the source genesis into the target version and prints to STDOUT. For more information on genesis.json, see the Join Testnet or Join Mainnet guide.

Syntax

injectived migrate <target version> <path-to-genesis-file>

Example

injectived migrate v1.9.0 /path/to/genesis.json --chain-id=injective-888 --genesis-time=2023-03-07T17:00:00Z

`query`

Manages queries. For a list of syntax and subcommands, run the query subcommand with the --help or -h flag:

injectived query -h

Subcommands:

injectived query [subcommand]

account: Query for account by address
auction: Querying commands for the auction module
auth: Querying commands for the auth module
authz: Querying commands for the authz module
bank: Querying commands for the bank module
block: Get verified data for a block at the given height
chainlink: Querying commands for the oracle module
distribution: Querying commands for the distribution module
evidence: Query for evidence by hash or for all (paginated) submitted evidence
exchange: Querying commands for the exchange module
feegrant: Querying commands for the feegrant module
gov: Querying commands for the governance module
ibc: Querying commands for the ibc module
ibc-fee: IBC relayer incentivization query subcommands
ibc-transfer: IBC fungible token transfer query subcommands
insurance: Querying commands for the insurance module
interchain-accounts: Interchain accounts subcommands
mint: Querying commands for the minting module
oracle: Querying commands for the oracle module
params: Querying commands for the params module
peggy: Querying commands for the peggy module
slashing: Querying commands for the slashing module
staking: Querying commands for the staking module
tendermint-validator-set: Get the full Tendermint validator set at given height
tokenfactory: Querying commands for the tokenfactory module
tx: Query for a transaction by hash, account sequence, or combination or comma-separated signatures in a committed block
txs: Query for paginated transactions that match a set of events
upgrade: Querying commands for the upgrade module
wasm: Querying commands for the wasm module
xwasm: Querying commands for the wasmx module

`rollback`

A state rollback is performed to recover from an incorrect application state transition, when Tendermint has persisted an incorrect app hash and is thus unable to make progress. Rollback overwrites a state at height n with the state at height n - 1. The application also rolls back to height n - 1. No blocks are removed, so upon restarting Tendermint the transactions in block n will be re-executed against the application.

Syntax

injectived rollback

`rosetta`

Creates a Rosetta server.

Syntax

injectived rosetta [flags]

`start`

Runs the full node application with Tendermint in or out of process. By default, the application runs with Tendermint in process.

The start command has many flags available. Run the start command with --help or -h to view all flags.

Syntax

injectived start [flags]

`status`

Displays the status of a remote node. Use the --node or -n flag to specify a node endpoint.

Syntax

injectived status

`tendermint`

Manages the Tendermint protocol. For a list of syntax and subcommands, run the query subcommand with the --help or -h flag:

injectived tendermint -h

Subcommands:

injectived tendermint [subcommand]

reset-state: Remove all the data and WAL
show-address: Shows this node's Tendermint validator consensus address
show-node-id: Show this node's ID
show-validator: Show this node's Tendermint validator info
unsafe-reset-all: Remove all the data and WAL, reset this node's validator to genesis state
version Show Tendermint library versions

`testnet`

Creates a testnet with the specified number of directories and populates each directory with the necessary files.

The testnet command has many flags available. Run the testnet command with --help or -h to view all flags.

Syntax

injectived testnet [flags]

Example

injectived testnet --v 4 --keyring-backend test --output-dir ./output --ip-addresses 192.168.10.2

`tx`

Manages generation, signing, and broadcasting of transactions. See Using Injectived for examples.

For more information on syntax and available subcommands and, run the tx command with the --help or -h flag:

injectived tx -h

Subcommands:

injectived tx [subcommand]

auction: Auction transactions subcommands
authz: Authorization transactions subcommands
bank: Bank transactions subcommands
broadcast: Broadcast transactions generated offline
chainlink: Off-Chain Reporting (OCR) subcommands
crisis: Crisis transactions subcommands
decode: Decode a binary encoded transaction string
distribution: Distribution transactions subcommands
encode: Encode transactions generated offline
evidence: Evidence transactions subcommands
exchange: Exchange transactions subcommands
feegrant: Feegrant transactions subcommands
gov: Governance transactions subcommands
ibc: IBC transactions subcommands
ibc-fee: IBC relayer incentivization transactions subcommands
ibc-transfer: IBC fungible token transfer transactions subcommands
insurance: Insurance transactions subcommands
multisign: Generate multisig signatures for transactions generated offline
oracle: Oracle transactions subcommands
peggy: Peggy transactions subcommands
sign: Sign a transaction generated offline
sign-batch: Sign transaction batch files
slashing: Slashing transactions subcommands
staking: Staking transactions subcommands
tokenfactory: Tokenfactory transactions subcommands
validate-signatures: Validate transaction signatures
vesting: Vesting transactions subcommands
wasm: Wasm transactions subcommands
xwasm: Wasmx transactions subcommands

`validate-genesis`

Validates the genesis file at the default location or at the location specified. For more information on the genesis file, see the Join Testnet or Join Mainnet guide.

Syntax

injectived validate-genesis </path-to-file>

`version`

Returns the version of Injective you’re running.

Syntax

injectived version

PreviousUsing injectived NextReferences

Last updated 22 days ago